Eneos Products back to products

ENEOS MT Fluid

OVERVIEW

ENEOS Gear Oil GL-5 75W90 is a synthetic gear oil using the latest sulphur-phosphorus technology. This additive technology assures an excellent protection of the gears against metal-to-metal contact under the most severe conditions, even under shock-loads. ENEOS Gear Oil is recommended for use in bevel, spiral bevel and hypoid gear type differentials and in power dividers compatible with synchromesh ensures easy and smooth shifting even at very low temperatures.

SPECIAL FEATURES

APPLICATION

Motor oil for gasoline engines.

APPLICABLE VEHICLES

Manual transmission and none-limited differentials.

Any manual transmission or differential (NON-LSD) requiring 75W-90 & GL5 viscosity

CONTAINERS

1USQ bottle

Typical Properties of ENEOS MT Fluid

Quality grade
SAE viscosity grade
Appearance
Density (15°C), g/cm3	0.890
Flash point (COC), °C	192
Kinematic viscosity
(40°C), mm2/s	82.0
(100°C), mm2/s	14.7
Viscosity index	188
Low-temperature viscosity (-40°C) mPas	15,000
Pour point, °C	-42.5
TAN, mgKOH/g	1.30
TBN (HCl), mgKOH/g	4.3
Color (ASTM)	L1.0

Note: The typical properties may be changed without notice. (August 2009)

Follow these precautions when handling this product:

Handling Precautions	Draining oil from a hot transmission can cause burns. Drain oil only after the transmission has cooled. Inflammation can occur if oil enters the eyes. When handling this oil, wear protective goggles or take other measures to prevent eye contact. Inflammation can occur if oil comes into contact with skin. When handling this oil, wear protective gloves or take other measures to prevent skin contact. Do not drink this oil. (Swallowing this oil can cause diarrhea and nausea.) Keep out of reach of children. Read the Material Safety Data Sheet (MSDS) for this product before using the product. Obtain the Material Safety Data Sheet from where you purchased the product.
First Aid	In case of eye contact, rinse eyes thoroughly with clean water and consult with a physician. In case of skin contact, wash skin thoroughly with soap and water. If this oil is swallowed, do not induce vomiting. Consult with a physician immediately.
Disposal of Used Oil and Containers	Do not apply pressure to empty containers. The containers may burst if pressure is applied. Do not weld, heat, drill, or cut the containers. The remaining oil may ignite and the containers may explode. Follow all applicable laws and regulations when disposing of used oil or containers. If you are unsure of the proper disposal methods, consult first with the seller of the oil.
Storage Method	Seal the container tightly after use in order to prevent dirt, moisture, etc., from entering the oil. Store in a dark location. Avoid direct sunlight.
PL-5	AUT-0050-0412