ENEOS Products back to products

ENEOS 5W-40

GF- 5 OVERVIEW

The new ILSAC GF-5 specification is an improvement in engine oil performance compared to the current GF-4 specification. The new ENEOS GF-5 oil provides better fuel economy, increased emission system durability, enhanced piston cleanliness, reduced engine sludge, and improved turbocharger protection.

SPECIAL FEATURES

Meets Latest API Standard
ENEOS Motor Oil 5W-40 is for automobiles with factory recommended viscosity of 5W-40. It is a high-performance engine oil used in gasoline and diesel engines that meets the American Petroleum Institute (API) standard SN/CF.
Meets ACEA Standards
ENEOS Motor Oil 5W-40 meets the European Automobile Manufacturers Association (ACEA) A3/B4-08, so it is especially suitable for European cars.
Also Compatible with Diesel Engines
ENEOS Motor Oil 5W-40 also meets the API CF standard. It is an excellent high performance oil for small passenger diesel engines.

APPLICATION

Motor oil for gasoline and diesel engines.

APPLICABLE VEHICLES

Gasoline vehicles: European/Japanese/Domestic cars, high-grade passenger cars, high-output sports cars, etc.

Meets the requirement of MB 229.3, VW 502.00/505.00, Porsche Approval, and RN 710/700

Diesel vehicles: Passenger cars and small trucks

CONTAINERS

1 US QT and 1 US Gallon

Typical Properties of ENEOS Motor Oil

Quality grade	API SN/CF and ACEA A3/B4-08
SAE viscosity grade	5W-40
Density (15°C) g/cm3	0.856
Flash point (COC) °C	226
Kinematic viscosity
(40°C) mm2/s	90.23
(100°C) mm2/s	14.67
Viscosity index	170
CCS Viscosity mPa's	6100 (-30°C)
Pour point °C	-35
Acid Number mgKOH/g	2.51
Base Number (HCIO4) mgKOH/g	8.33
Color (ASTM)	L4.0
HTHS Viscosity (150°C) mPa's	3.96

Note: The typical properties may be changed without notice. (January 2011)

Follow these precautions when handling this product:

Handling Precautions	Draining oil from a hot transmission can cause burns. Drain oil only after the transmission has cooled. Inflammation can occur if oil enters the eyes. When handling this oil, wear protective goggles or take other measures to prevent eye contact. Inflammation can occur if oil comes into contact with skin. When handling this oil, wear protective gloves or take other measures to prevent skin contact. Do not drink this oil. (Swallowing this oil can cause diarrhea and nausea.) Keep out of reach of children. Read the Material Safety Data Sheet (MSDS) for this product before using the product. Obtain the Material Safety Data Sheet from where you purchased the product.
First Aid	In case of eye contact, rinse eyes thoroughly with clean water and consult with a physician. In case of skin contact, wash skin thoroughly with soap and water. If this oil is swallowed, do not induce vomiting. Consult with a physician immediately.
Disposal of Used Oil and Containers	Do not apply pressure to empty containers. The containers may burst if pressure is applied. Do not weld, heat, drill, or cut the containers. The remaining oil may ignite and the containers may explode. Follow all applicable laws and regulations when disposing of used oil or containers. If you are unsure of the proper disposal methods, consult first with the seller of the oil.
Storage Method	Seal the container tightly after use in order to prevent dirt, moisture, etc., from entering the oil. Store in a dark location. Avoid direct sunlight.
PL-5	AUT-0035-04121